We take the hassle and expense of having to ‘Hitch it up’ 

We have a fully mobile equipped service van that comes to you whether its at home, in storage or on site.

We are a proud member of the Approved Workshop Scheme (AWS). This allows us to carry out your caravan service whilst still maintaining your manufacturer’s warranty. The scheme is supported by all major UK manufacturers.

Why get an annual service?

Many people forget that a tourer is just as important as a car to have regular services. Regular servicing not just about keeping your warranty valid, whether your tourer is in or out of warranty we do promote that your tourer should be serviced annually for both peace and mind knowing that when you are towing AND staying in it, it is safe for use and at the same time protecting your investment when you decide to sell on. 

2 Questions- Would you buy a used vehicle with no history or maintenance records and would you purchase a brand new car and not have it serviced and expect to travel 100,000 miles without servicing or maintenance? 

Answer – Probably not!

Whilst we promote do this, we understand that not everyone has a full service on an annual basis which is why we have other options available to suit needs or budget.  

What to expect

We go that extra mile with our servicing to ensure you as much trouble free touring as possible.

We complete a thorough review of your tourer from the ground up, which it includes the hitch chassis, wheels/tyres, brakes. all the internals which includes all the appliances, electrical systems including the RCD, water systems and if you have Alde wet central heating we also check your fluid. we also complete in accordance with the Approved workshop scheme and uk manufactures guidelines a detailed water ingress report with recommendations if readings are considered higher than expected.

We even lubricate your window rubbers and locks! 

We allow 4 hours per service but some can take longer if we identify more concerns/issues.

Single Axle

Twin Axle

  • Chassis Services

    Includes hitch assembly, braking system, running gear & tyres

    £140

    Complete Services

    This is the complete tourer service that includes Chassis & Habitation Services

    £200

    Habitation Services

    Includes Gas, Electrical (12v/mains), Water system,Water ingress, Furniture, Aplliance checks.

    £160
    Online Enquiry powered by ServiceM8
  • Chassis Services

    Includes hitch assembly, braking system, running gear & tyres

    £160

    Complete Services

    This is the complete tourer service that includes Chassis & Habitation Services

    £235

    Habitation Services

    Includes Gas, Electrical (12v/mains), Water system,Water ingress, Furniture, Aplliance checks.

    £160
    Online Enquiry powered by ServiceM8

After the service

Every tourer will be given a full detailed report indicating all the checks that have been made and their findings. 

If we find any defects at any stage during the service our engineer we will discuss these with you prior to any additional work that may need either immediate or future repair. Any faults which are not rectified at the service  we will give you an honest assessment of the urgency of the repairs required.

Any recommendations are also noted down on the sheet and quotes can be given for any work required.

Need Tyres?

We can also offer replacement tyres if needed, direct with a recognised local Mobile Tyre Fitter at an extremely competitive price. They can be fitted either at the service or at a later date.

Whats involved in a service?

Chassis Service
Caravan Habitation
Motorhome Habitiation
Complete Full Service
Chassis Service

Bodywork

Grab Handle- Check security & sealing
Number Plate- Check condition & marked with the relevant standard BS AU 145(d)

Chassis and running gear

Corner steadies- visual check, operation & lubrication
Coupling Head- Check wear/damage
Ball acting stabiliser- Check condition of pads and contamination
Coupling head gaiter- Check condition/splits
Breakaway cable- check condition, routing and integrity
Drawbar- Visual Check
Jockey wheel- check condition/ operation & lubricate
Corner steadies
Wheels and tyres 
Spare wheel & carrier
Chassis  
Suspension and axle
Braking System
Handbrake mechanism- Check operation & adjust if necessary 

Electrical Systems

13 pin/7 pin plugs & cables- check condition and test
Road lights and reflectors- check operation & condition

Caravan Habitation

Bodywork

  • Doors & Windows- Check operation of locks, stays, seals & delamination
  • Grab Handle- Check security & sealing
  • Number Plate- Check condition & marked with the relevant standard BS AU 145(d)
  • General roof condition

Chassis and running gear

  • Corner steadies- visual check, operation & lubrication
  • Coupling Head- Check wear/damage
  • Ball acting stabiliser-
  • Check condition of pads and contamination
  • Coupling head gaiter- Check condition/splits
  • Breakaway cable- check condition, routing and integrity
  • Drawbar- Visual Check
  • Jockey wheel- check condition/ operation & lubricate
  • Corner steadies
  • Wheels and tyres
  • Spare wheel & carrier
  • Chassis
  • Suspension and axle
  • Braking System
  • Handbrake mechanism- Check operation & adjust if necessary

Internal

  • Floor- Check for sponginess/delamination
  • Furniture- Check condition & operation of all doors/drawers handles and fixings
  • Blinds & fly screen- check operation (tension) & material for damage
  • Damp Test- Carry out check and complete separate damp report sheet

Gas System- Appliances not serviced unless requested

  • Regulator, gas hose, pipework and manifold
  • Carry out gas soundness test
  • Appliances- check operation only incl.FFD’s
  • Security of gas cylinders
  • Ensure all as dispersal vents are clear

Electrical Systems

  • 13 pin/7 pin plugs & cables- check condition and test
  • Road lights and reflectors- check operation & condition
  • Leisure battery-(if fitted) check voltage and charge state.
  • Perform high discharge test
  • Battery compartment- check security
    230v & 12v Fridge operation
  • Interior lighting- Check operation and fuse rating
  • Awning light
  • Wiring on all ELV circuits- Visual checkLV inlet plug- check condition
  • Earth bonding- visual inspection
  • 230v Consumer unit-
  • Load test & test button
  • 230v Sockets- Polarity test
  • Check operation of standard fitted 230v appliances, fans and luminaries
  • Check operation hob (if fitted)
 

Water System

  • Water pump & pressure switch / micro switches- check operation
  • Taps, Valve, pipes- check operation & leaks- check condition and operation
  • Water inlets- Check for leaks
  • Water tanks (if fitted) – check for leaks and security
  • Waste System- Check for leaks
  • Drain down- (unless advised by the customer)
  • Toilet- Check operation & lubricate seals

Ventilation

  • Fixed Ventilation- Check for obstruction
  • Roof Lights- Check condition & operation

Fire and Safety if Fitted

  • Smoke and/or carbon monoxide alarm(s)
  • Fire extinguisher

Motorhome Habitiation

Bodywork

  • Doors & Windows- Check operation of locks, stays, seals & delamination
  • General roof condition
  • Electric Step- Check operation of step (if fitted)

Internal

  • Floor- Check for sponginess/delamination
  • Furniture- Check condition & operation of all doors/drawers handles and fixings
  • Blinds & fly screen- check operation (tension) & material for damage
  • Damp Test- Carry out check and complete separate damp report sheet

Gas System- Appliances not serviced unless requested

  • Regulator, gas hose, pipework and manifold
  • Carry out gas soundness test
  • Appliances- check operation only incl.FFD’s
  • Security of gas cylinders
  • Ensure all as dispersal vents are clear
  • Underslung Tank (if fitted)- Check security

Electrical Systems

  • Leisure battery-(if fitted) check voltage and charge state.
  • Perform high discharge test
  • Battery compartment- check security
  • 230v & 12v Fridge operation
  • Interior lighting- Check operation and fuse rating
  • Awning light
  • Wiring on all ELV circuits- Visual check
  • LV inlet plug- check condition
  • Earth bonding- visual inspection
  • 230v Consumer unit- Load test & test button
  • 230v Sockets- Polarity test
  • Check operation of standard fitted 230v appliances, fans and luminaries
  • Check operation hob (if fitted)

Water Systems

  • Water pump & pressure switch / micro switches- check operation
  • Taps, Valve, pipes- check operation & leaks- check condition and operation
  • Water inlets- Check for leaks
  • Water tanks (if fitted) – check for leaks and security
  • Waste System- Check for leaks
  • Drain down- (unless advised by the customer)
  • Toilet- Check operation & lubricate seals

Ventilation

  • Fixed Ventilation- Check for obstruction
  • Roof Lights- Check condition & operation

Fire and Safety if Fitted

Smoke and/or carbon monoxide alarm(s)
Fire extinguisher

Complete Full Service

Bodywork

  • Doors & Windows- Check operation of locks, stays, seals & delamination
  • Grab Handle- Check security & sealing
  • Number Plate- Check condition & marked with the relevant standard BS AU 145(d)
  • General roof condition

Chassis and running gear

  • Corner steadies- visual check, operation & lubrication
  • Coupling Head- Check wear/damage
  • Ball acting stabiliser-
  • Check condition of pads and contamination
  • Coupling head gaiter- Check condition/splits
  • Breakaway cable- check condition, routing and integrity
  • Drawbar- Visual Check
  • Jockey wheel- check condition/ operation & lubricate
  • Corner steadies
  • Wheels and tyres
  • Spare wheel & carrier
  • Chassis
  • Suspension and axle
  • Braking System
  • Handbrake mechanism- Check operation & adjust if necessary

Internal

  • Floor- Check for sponginess/delamination
  • Furniture- Check condition & operation of all doors/drawers handles and fixings
  • Blinds & fly screen- check operation (tension) & material for damage
  • Damp Test- Carry out check and complete separate damp report sheet

Gas System- Appliances not serviced unless requested

  • Regulator, gas hose, pipework and manifold
  • Carry out gas soundness test
  • Appliances- check operation only incl.FFD’s
  • Security of gas cylinders
  • Ensure all as dispersal vents are clear

Electrical Systems

  • 13 pin/7 pin plugs & cables- check condition and test
  • Road lights and reflectors- check operation & condition
  • Leisure battery-(if fitted) check voltage and charge state.
  • Perform high discharge test
  • Battery compartment- check security
    230v & 12v Fridge operation
  • Interior lighting- Check operation and fuse rating
  • Awning light
  • Wiring on all ELV circuits- Visual checkLV inlet plug- check condition
  • Earth bonding- visual inspection
  • 230v Consumer unit-
  • Load test & test button
  • 230v Sockets- Polarity test
  • Check operation of standard fitted 230v appliances, fans and luminaries
  • Check operation hob (if fitted)
 

Water System

  • Water pump & pressure switch / micro switches- check operation
  • Taps, Valve, pipes- check operation & leaks- check condition and operation
  • Water inlets- Check for leaks
  • Water tanks (if fitted) – check for leaks and security
  • Waste System- Check for leaks
  • Drain down- (unless advised by the customer)
  • Toilet- Check operation & lubricate seals

Ventilation

  • Fixed Ventilation- Check for obstruction
  • Roof Lights- Check condition & operation

Fire and Safety if Fitted

  • Smoke and/or carbon monoxide alarm(s)
  • Fire extinguisher